Retrofit Seat Heating MG EHS | Carbon Kit
Retrofit seat heating in your MG EHS with a universal carbon kit made for cars that left the factory without heated seats. The flexible carbon heating mats slip under the existing seat cover and lie flat against the cushion and backrest, so you feel even, noticeable warmth within minutes of switching on. This is a genuine retrofit carbon seat heating MG EHS solution: no vehicle-specific part, no OE number, and no control unit to program.
Each carbon seat heating MG mat is shaped to lie neatly across the seat surface and can be fitted to the driver seat, the front passenger seat, or both. Choose a single seat or order the seat heating set for a matched pair, pick a 2-stage or 5-stage switch, and finish with an OE-look rocker switch that blends into the cabin of your MG EHS.
Fitment MG EHS
| Fitment | Fits every car |
|---|---|
| Model year | 2019–2023 |
| Power | 12V · Carbon |
How to retrofit the seat heating
A universal retrofit that slips under the existing seat cover in a few straightforward steps.
- Loosen and lift the existing seat cover on the cushion and backrest to expose the foam surface.
- Lay the flexible carbon heating mat flat on the seat surface and the backrest, smoothing out any creases.
- Route the connecting cables down the side of the seat toward the switch position and the power source.
- Connect the mat to the rocker switch and to a 12V ignition-switched supply so it only runs with the engine on.
- Mount the switch in a clean spot on the trim or center console and refit the seat cover.
- Switch on and test each heat level to confirm the seat warms up evenly before you finish.
Heat levels and even carbon warmth
Two switch versions cover every preference: the 2-stage model offers two heat levels for simple low and high control, while the 5-stage model adds finer steps so you can dial in exactly the warmth you want. The carbon elements spread heat evenly across the cushion and backrest and reach a noticeable temperature within minutes, and a built-in thermostat with overheat cut-off keeps the mat at a safe, steady level.
Versions
For 1 seat
Single-seat kit with one flexible carbon mat for the cushion and backrest of one seat, plus a switch and the wiring you need.
For 2 seats / pair
Seat heating set for two seats, with matching carbon mats for the driver and front passenger seats and switches for both.
Switch: 2 or 5 stages
Choose your switch: the 2-stage model gives two heat levels for quick low/high control, while the 5-stage model adds finer steps for more precise warmth. Both are available for 1 seat or as a set for 2 seats.
Seat heating for this vehicle
Pick your switch and seat count, then add the carbon seat heating kit for your MG EHS to your basket today.
Suitable seat heating (universal retrofit kit) for MG EHS →
Your Benefits
- Flexible carbon heating mats are durable and resist folding fatigue over years of use
- Fast warm-up delivers noticeable heat within minutes of switching on
- Low current draw is gentle on the battery and the electrical system
- Multiple heat levels let you fine-tune the warmth to the weather
- Fits under both fabric and leather seat covers without changing the look
- Simple DIY retrofit installs under the existing cover with basic hand tools
Frequently asked questions
- Does this seat heating fit my MG EHS?
- Yes. The carbon mats are universal and flexible, so they fit the seats of virtually any car, including the MG EHS. There is no vehicle-specific part and no OE number to match, the kit simply lies under your existing seat cover.
- How hard is the installation?
- It is a manageable DIY job. You lift the seat cover, lay the flat carbon mat on the cushion and backrest, route the cables, connect the switch to a 12V ignition supply, and refit the cover. Basic hand tools and some patience are enough.
- How many heat levels are there?
- Two switch versions are available. The 2-stage model gives two heat levels for quick low/high control, and the 5-stage model offers five steps for finer adjustment. You pick the one that suits you when you order.
- How much power does it use?
- The carbon mats draw a low current, so they are easy on the battery and the electrical system. Wired to an ignition-switched 12V supply, the heating only runs while the engine is on, which avoids draining the battery when parked.
- Can it go under a leather cover?
- Yes. The thin, flexible carbon mats sit under fabric and leather covers alike. They lie flat against the cushion so the seat keeps its original look and feel after installation.
- Can I heat one seat or both?
- Both options are available. Order a single kit for one seat, such as the driver seat, or choose the set for two seats to heat the driver and front passenger seats together.